493
(7) Indicate the completion of update.
(7)
IMPORTANT:
In A1080a-D model, the version of Management Firmware in both
servers must be the same.
IMPORTANT:
NEC unrecommends the firmware update operation to you while
the DC power is on because the application of the OS may not
work well.
In A1080a-D model, if another server is starting up, don’t
execute firmware update operation until the status of another
server will be “OS Running or EFI Manager Booted”.
Don't execute firmware update operation until the status of this
server will reach to “Stopped” after power-off.
In A1080a-D model, if another server is stopping, don’t execute
firmware update operation until the status of another server will
reach to “Stopped”.
When the firmware update completed, please clear the cache of
the web browser.
To Next Page
Loading...
