NEC Express 5800 - Page 553

553
・ Examples
If the properties such as ipaddress, subnetmask,usedhcp and Defaultgatewayaddres are set,
the properties are displayed as “Not committed” unless committed=1 is set.
Ipaddress setting example1
-> cd /system1/nic1
COMMAND COMPLETED :
cd /system1/nic1
ufip=/system1/nic1
-> set ipaddress=192.168.1.5
COMMAND COMPLETED :
set ipaddress=192.168.1.5
ufip=/system1/nic1
ipaddress=192.168.1.5
-> set committed=1
COMMAND COMPLETED :
set committed=1
ufip=/system1/nic1
committed=1
Network configuration is going to be committed.....
Do you agree that Current Session will go off? y/n:y （*）
The Current Session will go off..
User is requested to Open a new Session with the new session parameters.....
(*) It is displayed and requires the input if started up using TELNET/SSH.
Ipaddress setting example2
-> set /system1/nic1 ipaddress=192.168.1.6 committed=1
COMMAND COMPLETED :
set /system1/nic1 ipaddress=192.168.1.6 committed=1
ufip=/system1/nic1
ipaddress=192.168.1.6
committed=1
Network configuration is going to be committed.....
Do you agree that Current Session will go off? y/n:y (*)
The Current Session will go off..
User is requested to Open a new Session with the new session parameters.....
(*) It is displayed and requires the input if started up using TELNET/SSH.