Operation and Maintenance
641
11. On the next screen, specify the console to execute the TeDoLi.
Enter the following output target in <boot: _.
If there is no target input within 3 seconds after the screen below is displayed, the output
target will be SOL.
(1) Using SOL (Serial Over LAN)
Press “Return” as it is.
(2) Using VGA/remote KVM
Enter ”linux_vga” and press “Return.”
(3) Using serial console
Enter “linux” and press “Return.”
# If no target is specified, it is output to the SOL.
# Nothing is output for a console that is unspecified.
To Next Page
Loading...
