Operation and Maintenance
658
Use <warn> command to check the detail information when warning occurs on the test.
The following is an example of screen using the command.
• When a warning occurs on a test, the screen shows all the detailed information of tests that
became warning. No information appears if there is no warning.
• Use <stat> command to check the number of test becoming warning.
TeDoLi> warn
--------------------------------------------
BM/MB/PCI9/Port1/SCSI-ID0 LUN0(iStorage 1000)
---------------------------------------------
Device number : 19
Warning messages exist, although successfully completed the test.
Command complete with retry. (retry count : 1)
SCSI command error occurred.
I/O status: 0 (H)
API status: 00 (H)
Target status: 00 (H)
Host status: 02 (H)
Driver status: 00 (H)
Residual count: 59392
Duration: 260
Info: 1 (H)
Command: READ 16
CDB: 88 00 00 00 00 00 00 25 8d 06 00 00 00 74 00 00
To Next Page
Loading...
