NEC Express 5800 - Page 669

Operation and Maintenance
669
2. Error message
Message Content
Close error. (errno=xx) Closing the device failed.
errno : Refer to Appendix B (1) errno.
Data unmatch error.
Expected data is as follows.
xx: xx xx xx ...
Actual data is as follows.
xx: xx xx xx ...
Data mismatching occurred.
Failed in getting SCSI ID.
(status=xx, errno=xx)
Collecting SCSI ID information of device failed.
status : Refer to Appendix B (1) errno.
errno : Refer to Appendix B (1) errno.
Open error. (errno=xx) Opening device failed.
errno : Refer to Appendix B (1) errno.
Terminated the test due to an
unexpected error.
SCSI command error
occurred.
I/O status : xx (H)
API status : xx (H)
Target status : xx (H)
Host status : xx (H)
Driver status : xx (H)
Residual count : xx
Duration : xx
Info : xx (H)
Sense data : key: xx,
ASC:xx,
ASCQ:xx (H)
xx : xx xx xx ...
Command : xx
CDB : xx xx xx ...
Command ended abnormally.
I/O status : Refer to Appendix B (1) errno.
API status : Refer to Appendix B (2) API status.
Target status : Refer to Appendix B (3) SCSI target status.
Host status : Refer to Appendix B (4) SCSI host status.
Driver status : Refer to Appendix B (5) SCSI driver status.
Sense data : Refer to Appendix B (6) sense code.
Test is terminated due to
error.
Test ended abnormally.