X
(2) API Status
The contents of API status (ATA Command) are described below.
Code Description
------------------------------------------------------------------
0 Normal
1 No buffer found at data transfer command/Buffer found at data buffer command
2 ATA command buffer securement request failed
3 ATA command (no data transfer) failed
4 ATA command (with data transfer) failed
Descriptions of API status (ATA IO) are as follows.
Code Description
------------------------------------------------------------------
0 Normal
1 No data buffer
3 Seek failed
4 Read/Write failed
(3) SCSI Target Status
The contents of SCSI Target status are described below.
Code Description
------------------------------------------------------------------
00 Good
01 Check condition
02 Condition met
04 Busy
08 Intermediate
0A Intermediate-condition met
0C Reservation conflict
11 Command terminated
14 Queue full
To Next Page
Loading...
