XIII
04 03 Logical unit not ready, manual intervention required
04 04 Logical unit not ready, format in progress
04 05 Logical unit not ready, rebuild in progress
04 06 Logical unit not ready, recalculation in progress
04 07 Logical unit not ready, operation in progress
04 08 Logical unit not ready, long write in progress
05 00 Logical unit does not respond to selection
06 00 No reference position found
07 00 Multiple peripheral devices selected
08 00 Logical unit communication failure
08 01 Logical unit communication time-out
08 02 Logical unit communication parity error
08 03 Logical unit communication CRC error (ultra-DMA/32)
09 00 Track following error
09 01 Tracking servo failure
09 02 Focus servo failure
09 03 Spindle servo failure
09 04 Head select fault
0A 00 Error log overflow
0B 00 Warning
0B 01 Warning: specified temperature exceeded
0B 02 Warning: enclosure degraded
0C 00 Write error
0C 01 Write error: recovered with auto reallocation
0C 02 Write error: auto reallocation failed
0C 03 Write error: recommend reassignment
0C 04 Compression check miscompare error
0C 05 Data expansion occurred during compression
0C 06 Block not compressible
0C 07 Write error: recovery needed
0C 08 Write error: recovery failed
0C 09 Write error: loss of streaming
0C 0A Write error: padding blocks added
10 00 ID CRC or ECC error
11 00 Unrecovered read error
11 01 Read retries exhausted
11 02 Error too long to correct
11 03 Multiple read errors
11 04 Unrecovered read error: auto reallocate failed
11 05 L-EC uncorrectable error
11 06 CIRC unrecovered error
11 07 Data resynchronization error
11 08 Incomplete block read
11 09 No gap found
11 0A Miscorrected error
11 0B Unrecovered read error: recommend reassignment
11 0C Unrecovered read error: recommend rewrite
11 0D De-compression CRC error
11 0E Cannot decompress using declared algorithm
To Next Page
Loading...
