Nortel BayStack 450-24T - Chapter 3 Using the Console Interface

309978-D Rev 01 3-1
Chapter 3
Using the Console Interface
This chapter describes how to configure and manage the BayStack 450 switch
using the menu-driven console interface (CI).
This chapter covers the following topics:
• “Accessing the CI Menus and Screens” (page 3-2)
• “Main Menu” (page 3-5)
• “IP Configuration/Setup” (page 3-9)
• “SNMP Configuration” (page 3-14)
• “System Characteristics” (page 3-16)
• “Switch Configuration” (page 3-19)
• “Console/Comm Port Configuration” (page 3-100)
• “Identify Unit Numbers” (page 3-107)
• “Renumber Stack Units” (page 3-107)
• “Display Hardware Units” (page 3-109)
• “Spanning Tree Configuration” (page 3-110)
• “TELNET/SNMP Manager List Configuration” (page 3-118)
• “Software Download” (page 3-121)
• “Configuration File” (page 3-125)
• “Display Event Log” (page 3-128)
• “Save Current Settings” (page 3-131)
• “Reset” (page 3-131)
• “Reset to Default Settings” (page 3-133)
• “Logout” (page 3-136)