Using the BayStack 450 10/100/1000 Series Switch
xxx 309978-D Rev 01
Related Publications
For more information about using the BayStack 450 switch, refer to the following
publications:
• Installing Media Dependent Adapters (MDAs) (Part number 302403-F)
Describes how to install optional MDAs on your BayStack 450 switch.
• Gigabit Interface Converter (GBIC) Installation Guide (Part number
208723-A)
Provides a list of GBICS that are available from Nortel Networks, and
includes procedures for installing/removing GBICs from supported devices,
general specifications, cabling standards, and product descriptions for each
model.
• Installing the BayStack 400-ST1 Cascade Module (Part number 304433-B)
Describes how to install optional BayStack 400-ST1 Cascade Modules to
create a stack configuration of up to eight supported switches.
• Installing and Maintaining the HRPSU (Part number 114312-D)
Describes how to install and maintain a Nortel Networks High Power
Redundant Power Supply Unit (HRPSU) to your switch.
• Wall Mounting Instructions (Part number 304602-A)
Describes how to mount up to two BayStack 350 or BayStack 450 switches on
any wall that can safely support the weight of the switches, including any
attached cables.
• Reference for the BayStack 350/410/450 Management Software Operations
(Part number 210245-C)
Describes the Nortel Networks Device Manager software, a set of graphical
network management applications you can use to configure and manage the
BayStack 350/410/450 switches.
• Bay Networks Guide to Implementing BaySecure LAN Access for Ethernet
(Part number 345-1106A)
Describes Nortel Networks real-time security system that safeguards Ethernet
networks from unauthorized surveillance and intrusion.
To Next Page
Loading...
