Nortel BayStack 450-24T - Figure 3-10. MAC Address Security Port Configuration (Screen 1 of 2); MAC Address Security Port Configuration

Using the BayStack 450 10/100/1000 Series Switch
3-30 309978-D Rev 01
MAC Address Security Port Configuration
The MAC Address Security Port Configuration screen (Figures 3-10 and 3-11)
allows you to enable or disable the MAC address security for each port.
Choose MAC Address Security Port Configuration (or press p) from the MAC
Address Security Configuration Menu to display the MAC Address Security Port
Configuration screen.
Figure 3-10. MAC Address Security Port Configuration (Screen 1 of 2)
Note: You cannot enable MAC address security on a port that is currently
configured for EAPOL-based security.
MAC Address Security Port Configuration
Unit: [ 1 ]
Port Trunk Security
---- ----- ------------
1 [ Disabled ]
2 [ Disabled ]
3 [ Disabled ]
4 [ Disabled ]
5 [ Disabled ]
6 [ Disabled ]
7 [ Disabled ]
8 [ Disabled ]
9 [ Disabled ]
10 [ Disabled ]
11 [ Disabled ]
12 [ Disabled ]
13 [ Disabled ]
14 [ Disabled ]
More...
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.