Using the BayStack 450 10/100/1000 Series Switch
3-134 309978-D Rev 01
The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test
screen (
Figure 3-56), which is followed by the Nortel Networks logo screen
(Figure 3-57).
Figure 3-56. Self-Test Screen After Resetting to Default Settings
Note: The Self-Test screen remains displayed only if the self-test detects a
fatal error.
BayStack 450-xxx Self-Test
CPU RAM test ... Pass
ASIC addressing test ... Pass
ASIC buffer RAM test ... Pass
ASIC buffer stack init test ... Pass
Port internal loopback test ... Pass
Cascade SRAM test ... Pass
Fan test ... Pass
Self-test complete.