Using the BayStack 450 10/100/1000 Series Switch
3-34 309978-D Rev 01
Figure 3-13. MAC Address Security Port Lists Screen
Table 3-10 describes the MAC Address Security Port Lists screen fields.
Table 3-10. MAC Address Security Port Lists Screen Fields
Field Description
Entry Indicates the port list number (S1 to S32) that corresponds to the values you
set in the Port List field.
Port List Allows you to create a port list that you can use as an “Allowed Source” in the
MAC Address Security Table screen (see “Port List Syntax” on page 3-35).
MAC Address Security Port Lists
Entry Port List
----- ---------
S1 [ 1/1-7,2/1-7,2/9,3/1-4,4/12 ]
S2 [ 2/1-7,2/9,4/3-5 ]
S3 [ 1/3,2/7,3/1-4 ]
S4 [ 4/12 ]
S5 [ 1/NONE,2/NONE,3/NONE,4/NONE ]
S6 [ 1/ALL,2/ALL,3/ALL,4/ALL ]
S7 [ 3/ALL ]
More...
Press Ctrl-N to display next screen.
Enter unit/port,"1/NONE","1/ALL","2/3,4/7-9",press <Return> or <Enter> when done
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
To Next Page
Loading...
Need help?
General