Nortel BayStack 450-24T - Interface Options

Technical Specifications
309978-D Rev 01 A-3
Network Protocol and Standards Compatibility
Data Rate
Interface Options
• IEEE 802.1p (Prioritizing)
• IEEE 802.1Q (VLAN Tagging)
• IEEE 802.3 10BASE-T (ISO/IEC 8802-3, Clause 14)
• IEEE 802.3u 100BASE-FX (ISO/IEC 8802-3, Clause 26)
• IEEE 802.3u 100BASE-TX (ISO/IEC 8802-3, Clause 25)
• IEEE 802.3x (Full Duplex operation)
• IEEE 802.3z (Gigabit plus Flow Control)
•10 Mb/s Manchester encoded or 100 Mb/s 4B/5B encoded
• 10BASE-T/100BASE-TX -- RJ-45 (8-pin modular) connectors for MDI-X interface
• 100BASE-FX Fiber -- SC and MT-RJ connectors for switched 100 Mb/s
(100BASE-FX) connections over 50/125 and 62.5/125 micron multimode fiber optic
cable (2 km/1.2 mi maximum distance)
• 1000BASE-SX (Shortwave Gigabit Fiber) MDA -- SC connectors for shortwave
850 nm fiber optic connections over multimode (550 m/1,805 ft) fiber optic cable
• 1000BASE-LX (Longwave Gigabit Fiber) MDA -- SC connectors for longwave
1300 nm fiber optic connections over single-mode (5 km/3.1 mi) or multimode
(550 meter/1,805 ft) fiber optic cable
• ATM -- SC connectors for dual 155 Mb/s OC-3 connections over 8.5/125 µm
single-mode (20 km/12.4 mi) or 62.5/125 µm multimode (2 km/1.24 mi) fiber optic
cable