Nortel BayStack 450-24T - Figure 3-57. Nortel Networks Logo Screen after Resetting to Default Settings

Using the Console Interface
309978-D Rev 01 3-135
Figure 3-57. Nortel Networks Logo Screen After Resetting to Default Settings
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 450 main menu, press [Ctrl]-Y.
Note: The Nortel Networks logo screen for your switch will display the
correct model number and the current hardware, firmware, software, and ISVN
versions.
*******************************************************
* Nortel Networks *
* Copyright (c) 1996,2001 *
* All Rights Reserved *
* BayStack 450-24T *
* Versions: HW:Revx FW:Vx.xx SW:vx.x.x.x ISVN:x *
*******************************************************
Enter Ctrl-Y to begin.