Name: Nortel BayStack 450-24T
Brand: Nortel
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Using the BayStack 450 10/100/1000 Series Switch

3-118 309978-D Rev 01

TELNET/SNMP Manager List Configuration

The TELNET/ SNMP Manager List Configuration screen (Figure 3-47) allows

you to specify up to 10 user-assigned host IP addresses that are allowed TELNET

and SNMP access to the switch. When you set the TELNET Access value to

Enabled, you can communicate with the BayStack 450 switch from a remote

console terminal and can have up to four active TELNET sessions at one time.

Choose TELNET/ SNMP Mgr List Configuration (or press t) from the main menu

to open the TELNET/ SNMP Manager List Configuration screen.

Figure 3-47. TELNET/SNMP Manager List Configuration Screen

Table 3-41 describes the TELNET/SNMP Manager List Configuration screen

fields.

Note: In a mixed-stack configuration that includes one or more Business

Policy Switches, the Allowed Source IP Address list cannot be used for SNMP

security.

TELNET/SNMP Manager List Configuration

TELNET Access: [ Enabled ]

Inactivity Timeout: [ 15 minutes ]

Event Logging: [ All ]

Allowed Source IP Address Allowed Source Mask

------------------------- -------------------------

[ 0.0.0.0 ] [ 0.0.0.0 ]

[ 255.255.255.255 ] [ 255.255.255.255 ]

Use space bar to display choices, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Questions and Answers:

Need help?

Do you have a question about the Nortel BayStack 450-24T and is the answer not in the manual?

Nortel BayStack 450-24T Specifications

General