Using the BayStack 450 10/100/1000 Series Switch
3-18 309978-D Rev 01
sysObjectID A read-only field that provides a unique identification of the switch, which contains
the vendor’s private enterprise number.
sysUpTime A read-only field that shows the length of time since the last reset. Note that this field
is updated when the screen is redisplayed.
sysServices A read-only field that indicates the switch’s physical and data link layer functionality.
sysContact The name and phone number of the person responsible for the switch.
Default Zero-length string
Range Any ASCII string of up to 56 printable characters
1
sysName A name that uniquely identifies the switch.
Default Zero-length string
Range Any ASCII string of up to 56 printable characters
1
sysLocation The physical location of the switch.
Default Zero-length string
Range Any ASCII string of up to 56 printable characters
1
Although this field can be set to up to 255 characters from a Network Management Station (NMS), only 56 characters
are displayed on the console terminal.
Table 3-4. System Characteristics Screen Fields (continued)
Field Description
To Next Page
Loading...
Need help?
General