Nortel BayStack 450-24T - Page 262

Using the BayStack 450 10/100/1000 Series Switch
3-102 309978-D Rev 01
Console Switch
Password Type
Enables password protection for accessing the console interface (CI) of a
standalone switch through a console terminal.
If you set this field to Required, you can use the Logout option to restrict access
to the CI. Thereafter, you will need to specify the correct password at the
console-terminal prompt. See Console Read-Only Switch Password and
Console Read-Write Switch Password for more information.
Default None
Range None, Local Password, RADIUS Authentication
Console Stack
Password Type
Enables password protection for accessing the console interface (CI) of any
participating switch in a stack configuration, through a console terminal.
If you set this field to Required, you can use the Logout option to restrict access
to the CI of any stack unit. Thereafter, you will need to specify the correct
password at the console-terminal prompt when accessing the stack. See
Console Read-Only Stack Password and Console Read-Write Stack Password
for more information.
Default None
Range None, Local Password, RADIUS Authentication
TELNET Switch
Password Type
Enables password protection for accessing the console interface (CI) of a
standalone switch through a TELNET session.
If you set this field to Required, you can use the Logout option to restrict access
to the CI. Thereafter, you will need to specify the correct password at the
console-terminal prompt. See Console Read-Only Switch Password and
Console Read-Write Switch Password for more information.
Default None
Range None, Local Password, RADIUS Authentication
(continued)
Table 3-36. Console/Comm Port Configuration Screen Fields (continued)
Field Description