Using the BayStack 450 10/100/1000 Series Switch
3-120 309978-D Rev 01
Allowed Source
IP Address
Specifies up to 10 user-assigned host IP addresses that are allowed TELNET and SNMP
access to the switch.
Default 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Allowed Source
Mask
Specifies up to 10 user-assigned allowed source address masks. The remote IP address
is masked with the Allowed Source Mask and, if the resulting value equals the Allowed
Source IP address, the connection is allowed.
For example, a connection would be allowed with the following settings:
Remote IP address = 192.0.1.5
Allowed Source IP Address = 192.0.1.0
Allowed Source Mask = 255.255.255.0
Default 0.0.0.0 (no IP mask assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Table 3-41. TELNET/SNMP Manager List Configuration Screen Fields (continued)
Field Description
To Next Page
Loading...
