Nortel BayStack 450-24T - Page 391

Default Settings
309978-D Rev 01 G-7
Console Read-Only Switch
Password
user
Console Read-Write Switch
Password
secure
Console Read-Only Stack
Password
user
Console Read-Write Stack
Password
secure
Primary RADIUS Server 0.0.0.0
Secondary RADIUS Server 0.0.0.0
RADIUS UDP Port 1645
RADIUS Shared Secret Blank field
Renumber Stack Units (page 3-107) New Unit Number Current stack order
(Only appears when the switch is a
participant in a stack configuration.)
Renumber units with new
setting? No
Spanning Tree Port Configuration
(page 3-112) Unit 1
Participation Normal Learning
Priority 128
Path Cost 10 or 100
Spanning Tree Switch Settings
(page 3-115)
Bridge Priority 8000 (read-only)
Designated Root 8000 (bridge_id) (read-only)
Root Port Unit: 0 / Port: 0 (read-only)
Root Path Cost 0 (read-only)
Hello Time 2 seconds (read-only)
Maximum Age Time 20 seconds (read-only)
Forward Delay 15 seconds (read-only)
Bridge Hello Time 2 seconds (read-only)
Bridge Maximum Age Time 20 seconds (read-only)
Bridge Forward Delay 15 seconds (read-only)
(continued)
Table G-1. Factory Default Settings for the BayStack 450 Switch (continued)
CI screen Field Default setting