Nortel BayStack 450-24T - Page 395

309978-D Rev 01 Index-1
A
acronyms, 1-xxviii
Actual Hello Interval, 3-116
Aging Time field, 3-23
Allowed Source IP Address field, 3-120
Allowed Source Mask field, 3-120
asynchronous transfer mode
450-2M3/2S3 MDA, C-12
CI menus and screens, 3-89
configuration flowcharts, E-1
network example, 2-36
setting up, 2-36
terminology, concepts and examples, D-1
AT M. See asynchronous transfer mode
Authentication Trap field, 3-15
Autonegotiation
description, 2-31
field, 3-61
modes, 4-8
troubleshooting, 4-8
AutoPVID, 2-66, 3-55
Autosensing, 2-31
B
Base unit, 2-43
BayStack 450 switch
connectors, F-1
default port settings for VLANs, 2-53
features, 2-13 to 2-15
front panel, 2-2
BootP Request Mode field, 3-10
BootP. See Bootstrap Protocol
Bootstrap Protocol (BootP)
Always setting, 3-13
automatic IP configuration, 2-31
BOOTPTAB.TXT file, H-1
choosing a request mode, 3-11
Disabled setting, 3-12
Last Address setting, 3-12
sample configuration file, H-1
When Needed setting, 3-13
Bridge Forward Delay field, 3-117
Bridge Hello Time field, 3-117
Bridge Maximum Age Time field, 3-117
Bridge Priority field, 3-116
Broadcasts field, 3-86
C
Cascade module, 2-41
Clear All Port Statistics option, 3-21
Collisions field, 3-88
Comm Port Data Bits field, 3-100
Comm Port Parity field, 3-100
Comm Port Stop Bits field, 3-101
Community String field, 3-15
Configurable field, 3-10
configuration rules
IGMP Snooping, 2-73
MultiLink Trunking, 2-90
Port Mirroring, 2-103
VLANs, 2-68
connectors, F-1
AC power receptacle, 2-10
DB-9 console/comm port connector, F-5
RJ-45 port connector, F-1
Console Interface (CI)
cable, 2-10
Index