Nortel BayStack 450-24T - Page 397

309978-D Rev 01 Index-3
In-Band IP Address field, 3-10
In-Band Subnet Mask field, 3-10
Initial setup, 2-17
installation
chassis in a rack, 2-5
flat surface, 2-4
grounding, 2-3
LED verification, 2-14
requirements, 2-1
tools, 2-1
verifying, 2-14
Interoperability Software Version Number,
mixed stack configuration, 2-39
IP address
automatic configuration, 2-31
setting, 2-17
startup, 2-17
IP Configuration option, 3-6
IP Configuration screen, 3-9
IP subnet mask address
setting, 2-17, 2-20
startup, 2-17, 2-20
ISVN. See Interoperability Software Version Number
L
Last BootP field, 3-10
Last Reset Type field, 3-17
Late Collisions field, 3-88
learning rate, addresses per second, 2-13
LEDs
indications during software download process,
3-124
status monitors, 2-15
verifying installation with, 2-14
Link field, 3-61
Login Retries field, 3-119
Login Timeout field, 3-119
Logout option, 3-8, 3-136
logout, password-protected, 3-136
Lost Packets field, 3-86
M
MAC address
location, 2-31
stack MAC address, 2-31
when configuring the BootP server, 2-31
MAC Address field, 3-17
MAC Address Table option, 3-20
MAC Address Table screen, 3-22
MAC address-based network security, 2-20
configuring, 3-24
Main Menu
illustration, 2-18, 2-21
main menu, console interface, 3-5
Maximum Age Time field, 3-116
MDAs. See Media Dependent Adapters
MDI-X to MDI cable connections, F-3
MDI-X to MDI-X cable connections, F-4
Media Dependent Adapters, C-1
1000BASE-LX MDAs, C-9
1000BASE-SX MDAs, C-6
100BASE-FX MDAs, C-3
10BASE-T/100BASE-TX MDA, C-2
ATM MDA, C-12
installing, C-17
MIB. See Management Information Base
Multicasts field, 3-86
MultiLink Trunk Configuration option, 3-20
MultiLink Trunk Configuration screen, 3-64
MultiLink Trunking
configuration example, 2-78
configuration flowcharts, E-1
configuration rules, 2-90
Multiple Collisions field, 3-88
N
network configuration
configuring an ATM application, 2-36
configuring power workgroups and a shared media
hub, 2-35
network interface card (NIC)
connecting to, 2-8