Receiver Mode
R&S
®
ESR
206User Manual 1175.7068.02 ─ 12
Remote command:
Next Peak:
CALC:MARK:MAX:LEFT (<): CALCulate<n>:MARKer<m>:MAXimum:LEFT
on page 691
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 698
CALC:MARK:MAX:RIGH (>): CALCulate<n>:MARKer<m>:MAXimum:RIGHt
on page 693
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 699
CALC:DELT:MAX:NEXT (abs): CALCulate<n>:MARKer<m>:MAXimum:NEXT
on page 692
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 698
Next Min:
CALC:MARK:MIN:LEFT (>): CALCulate<n>:MARKer<m>:MINimum:LEFT
on page 693
CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 699
CALC:MARK:MIN:RIGH (>): CALCulate<n>:MARKer<m>:MINimum:RIGHt
on page 694
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 700
CALC:MARK:MIN:NEXT (abs): CALCulate<n>:MARKer<m>:MINimum:NEXT
on page 693
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 700
Search Limits
Opens a submenu to set the limits for maximum or minimum search in the x and y
direction.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] on page 690
Left Limit ← Search Limits
Opens an edit dialog box to enter a value for the lower limit (left vertical line: S1 for
span > 0; T1 for zero span). The search is performed between the lines of the left and
right limit (see also Right Limit softkey).
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT on page 689
Right Limit ← Search Limits
Opens an edit dialog box to enter a value for the upper limit (left vertical line: S2 for
span > 0; T2 for zero span). The search is performed between the lines of the left and
right limit (see also Left Limit softkey). If no value is set, the upper limit corresponds to
the stop frequency.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT on page 689
Threshold ← Search Limits
Opens an edit dialog box to define the threshold line. The threshold line represents the
lower level limit for a "Peak" search and the upper level limit for a "Min" search.
Common Analysis Functions
To Next Page
Loading...
Need help?
General
