Ricoh IM 550F

2.Installation
199
Value
Meaning
Solution/ Workaround
12
Parameter error
-
20
Dial-up authentication error
* These errors occur only in the modems that
support @Remote.
21
Answer tone detection error
22
Carrier detection error
23
Invalid setting value (modem)
24
Low power supply current
25
unplugged modem
26
Busy line
5. Make sure that the screen displays the Location Information with SP5-816-205 only when it has
been input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5-816-206.
7. Check the registration result with SP5-816-207.
Value
Meaning
Solution/ Workaround
0
Succeeded
-
1
Request number error
Check the request number again.
2
Already registered
Check the registration status.
3
Communication error (proxy
enabled)
Check the network condition.
4
Communication error (proxy
disabled)
Check the network condition.
5
Proxy error (Authentication error)
Check Proxy username and password.
8
Other error
See "SP5-816-208 Error Codes" below this.
9
Request number confirmation
executing
Processing… Please wait.
11
Already registered
-
12
Parameter error
-
20
Dial-up authentication error
* These errors occur only in the modems that
support @Remote.
21
Answer tone detection error
22
Carrier detection error
23
Invalid setting value (modem)
24
Low power supply current
25
unplugged modem
26
Busy line
8. Exit the SP mode.
SP5-816-208 Error Codes
Caused by Operation Error, Incorrect Setting