Ricoh IM 550F

4.Replacement and Adjustment
453
adjustment.
When using A4 sheet
When using LT sheet
[1] Move the finisher to the right by 3 mm.
[2] Move the finisher to the right by 1.5 mm.
[3] No adjustment required.
[4] Move the finisher to the left by 1.5 mm.
[5] Move the finisher to the left by 3 mm.
* "Left" and "right" indicate the directions when seen from the front of the machine.
See below for how to determine the finisher position.
1. Align the line [A] with one of the lines that matches the required distance.