Ricoh IM 550F

5.System Maintenance
471
Code
Contents
Solutions
again.
• The removable media is damaged if the update
fails again. Replace the removable media.
44
The data to be overwritten cannot be
accessed when controller-related
programs are downloaded.
• Switch the main power supply off and on to try
again.
• Install the correct ROM update data in the
removable media.
• Replace the controller board (PCB15) if the
data to be overwritten is contained on the
controller board (PCB15).
49
Firmware updates are currently
prohibited.
• The setting of Update Firmware in the
Administrator Tools has been set to [Prohibit]
by an administrator. Amend the setting to [Do
not Prohibit] and try again.
50
The results of the electronic
authorization check have rejected the
update data.
• Install the correct ROM update data in the
removable media.
57
@Remote is not connected at the
date/time reserved for receiving the
package firmware update from the
network.
• Check the @Remote connection.
58
Update cannot be done due to a
reception route problem.
• Check the @Remote connection.
59
HDD is not mounted.
• Check the HDD connection.
60
HDD could not be used during the
package firmware update.
• Try again.
• Replace the HDD if the download fails again.
61
The module ID for the package
firmware update is incorrect.
• Prepare the correct package files.
62
The configuration of the package
firmware update files is incorrect.
• Prepare the correct package files.
63
Reception fails due to the power off at
the reserved date/time of the remote
firmware update from the network.
• Update is to be done automatically when the
next reception time has elapsed.
64
Reception fails due to the power off at
the reserved date/time of the package
firmware update from the network.
• Reset the reservation date/time for the remote
update.
65
Reception fails due to the status error
• Update is to be done automatically when the