of the machine at the reserved
date/time of the remote firmware
update from the network.
next reception time has elapsed.
Reception failed due to the status error
of the machine at the reserved
date/time of the package firmware
update from the network.
• Reset the reservation date/time for the remote
update.
Acquisition of the latest version
information from the Gateway fails at
the reserved date/time of the remote
firmware update from the network.
• Check that the network is connected correctly.
Acquisition of the latest version
information from the Gateway fails.
• Check that the network is connected correctly.
Download fails at the reserved
date/time of the remote firmware
update from the network.
• Check that the network is connected correctly.
Package firmware download from the
network fails.
• Check that the network is connected correctly.
Network communication error occurs at
the reserved date/time of the package
firmware update from the network.
• Check that the network is connected correctly.
The setting of @Remote is invalid at
the reserved date/time of the package
firmware update from the network.
• Set the setting of @Remote Service in the
Administrator Tools to [Do not Prohibit].
Package file decompression has failed.
• If this occurred during the update by the
removable media, check that the removable
media is not defective, download the package
again, and retry the update.
• If this occurred during the remote firmware
update (WIM and utility) in the local
environment, replace the package file in the
local environment with the correct one and
retry the update.
• If this has occurred on other occasions or
keeps occurring even on the abovementioned
occasions, replace the DIMM of the controller
board (PCB15).
If it persists, replace the hard disk.