Ricoh IM 550F

5.System Maintenance
495
Code
Contents
Solutions
A card for the wrong model is inserted.
model in the SD card.
36
Module error.
The program to be downloaded does not
exist on the main unit.
The download destination specified by
the card does not match up to the
destination for the main unit’s program.
• Install the program to be updated in
advance.
• There is a possibility that the SD card
containing the program to be updated has
not been mounted. Check to confirm that the
SD card has been correctly mounted.
• The SD card is incorrect if the program to be
updated has been correctly installed. In this
case, insert the correct SC card.
38
The version of the downloaded program
has not been authorized for the update.
• Make sure that the program to be
overwritten is the specified version.
40
Engine download fails.
• Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board (PCB15) and the BiCU
(PCB16).
41
Fax download fails.
*1
• Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board (PCB15) and the FCU
board.
42
Control panel / language download fails.
*1
• Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board (PCB15) and the operation
panel unit.
43
Printing download fails.
*1
• Switch the main power supply off and on to
try again.
• The SD card media is damaged if the update
fails again. Replace the SD card media.
44
The data to be overwritten cannot be
accessed when controller-related
programs are downloaded.
• Switch the main power supply off and on to
try again.
• Install the correct ROM update data in the
SD card.
• Replace the controller board (PCB15) if the
data to be overwritten is contained on the
controller board (PCB15).