Ricoh IM 550F

5.System Maintenance
496
Code
Contents
Solutions
49
Firmware updates are currently
prohibited.
• The setting of Update Firmware in the
Administrator Tools has been set to [Prohibit]
by an administrator. Amend the setting to
[Do not Prohibit] and try again.
50
The results of the electronic authorization
check have rejected the update data.
• Install the correct ROM update data in the
SD card.
57
@Remote is not connected at the
date/time reserved for receiving the
package firmware update from the
network.
*1
• Check the @Remote connection.
58
Update cannot be done due to a
reception route problem.
*1
• Check the @Remote connection.
59
HDD is not mounted.
*1
• Check the HDD connection.
60
HDD could not be used during the
package firmware update.
*1
• Try again.
• Replace the HDD if the download fails again.
61
The module ID for the package firmware
update is incorrect.
*1
• Prepare the correct package files.
62
The configuration of the package
firmware update files is incorrect.
*1
• Prepare the correct package files.
63
Reception fails due to the power off at the
reserved date/time of the remote
firmware update from the network.
*1
• Update is to be done automatically when the
next reception time has elapsed.
64
Reception fails due to the power off at the
reserved date/time of the package
firmware update from the network.
*1
• Reset the reservation date/time for the
remote update.
65
Reception fails due to the status error of
the machine at the reserved date/time of
the remote firmware update from the
network.
*1
• Update is to be done automatically when the
next reception time has elapsed.
66
Reception failed due to the status error of
the machine at the reserved date/time of
the package firmware update from the
network.
*1
• Reset the reservation date/time for the
remote update.
67
Acquisition of the latest version
information from the Gateway fails at the
reserved date/time of the remote
firmware update from the network.
*1
• Check that the network is connected
correctly.