Ricoh IM 550F

6.Troubleshooting
570
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
3. Turn the main power OFF, replace the FFC between BiCU (PCB16) and IOB
(PCB17), and then turn the main power ON.
4. Turn the main power OFF, replace the IOB (PCB17), and then turn the main
power ON.
5. Turn the main power OFF, replace theBiCU (PCB16), and then turn the main
power ON.
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
SC668-
03
D
IOB (PCB17) Communication Error: Retry Timeout Error
Operation does not resume in 10 seconds after an error occurs.
• IOB (PCB17) defective
• BiCU (PCB16) defective
• FFC defective
1. Turn the main power OFF/ON.
2. Turn the main power OFF, replace the IOB (PCB17), and then turn the main
power ON.
3. Turn the main power OFF, replace theBiCU (PCB16), and then turn the main
power ON.
4. Turn the main power OFF, replace the FFC between BiCU (PCB16) and IOB
(PCB17), and then turn the main power ON.
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
SC669
EEPROM Communication Error
SC669-
01
D
EEPROM OPEN: ID error
SC669-
02
D
EEPROM OPEN: Channel error
SC669-
03
D
EEPROM OPEN: Device error
SC669-
04
D
EEPROM OPEN: Communication abort error
SC669-
05
D
EEPROM OPEN: Communication timeout error
SC669-
06
D
EEPROM OPEN: Operation stopped error
SC669-
07
D
EEPROM OPEN: Buffer full