Error Name/Error Condition/Major Cause/Solution
a job) that may be recovered by the auto reboot.
1. Turn the main power OFF/ON.
2. Update the firmware if more recent firmware was released.
Error Name/Error Condition/Major Cause/Solution
FCU job error (Recovery not possible)
This SC occurs when the FCU has detected a job error (failure to start or complete
a job) that will not be recovered by the auto reboot.
1. Turn the main power OFF/ON.
2. Update the firmware if more recent firmware was released.
Error Name/Error Condition/Major Cause/Solution
Delete all error (Delete data area) : Read error
Delete all error (Delete data area) : Write error
Delete all error (Delete data area) : No response from HDD
Delete all error (Delete data area) : Error in Kernel
Delete all error (Delete data area) : No designated partition
Delete all error (Delete data area) : No device file
Delete all error (Delete data area) : Start option error
Delete all error (Delete data area) : No designated sector number
Delete all error (Delete data area) : Failure in performing hdderase
Delete all error (Delete data area) : Other fatal errors
Delete all error (Delete data area) : End by cancellation
Delete all error (Delete data area) : library error
Delete all error (Delete data area) : Unavailable
Delete all error (Delete data area) : Erasing not finished
Delete all error (Delete data area) : HDD format failure (Normal)
Delete all error (Delete data area) : HDD format failure (Abnormal)
Delete all error (Delete data area) : Unauthorized library (IM 550F/600F/600SRF
Only)
Delete all error (Delete data area) : other errors
An error occurred while data was being erased on HDD or NVRAM.
• Error detected in HDD data delete program
To Next Page
Loading...
