Ricoh IM 550F

3.SP Mode Tables (Common for both MF Model and Printer Model)
34
1001
[Bit Switch]
Values
7
1001
[Bit Switch]
Values
1-
001-
005
Bit Switch 5
0
1
bit
0
Display Finishing Settings
Hide settings
Display
settings
If enabled, users will be able to configure the Collate
Settings, Staple Settings, and Punch Settings from
the operation panel. The available Settings will
depend on the device and configured options. (IM
600SRF only)
After enabling this BitSw, the settings will appear
under:
"User Tools > Machine Features >Printer Features >
System"
bit
1
Number of Copies with Paper Mismatch
Print Single
Copy
Print All
Copies
If a paper size or type mismatch occurs while
printing multiple copies, only a single copy is output
by default. Using this BitSw, the device can be
configured to print all copies even if a paper
mismatch occurs.
bit
2
GPS Filter
Enabled
Disabled
If the GPS Filter is disabled, SDK applications will
not be able to alter the print data standard printer
applications receive.
Note: The main purpose of this BitSw is for
troubleshooting the effects of SDK applications on
data.
bit
3
PS Trigger for PDL Switching
Standard
pattern
Pattern1
Specifying the auto detection algorithm for PS while
switching the print language.
If the Pattern1 is selected, "%%" is used as a printer
system PS trigger.
bit
4
Increase Max. Number of Stored Jobs.
Disabled (100)
Enabled
(XXX)
Changes the maximum number of jobs that can be
stored on the HDD. The default (disabled) is 100. If
this is enabled, the max. will be raised to 750 or
1000 depending on the model.