Ricoh IM 550F

3.SP Mode Tables (Common for both MF Model and Printer Model)
35
1001
[Bit Switch]
Values
bit
5
DFU
-
-
bit
6
Change Imposition Specification
Standard
specification
Old model
specification
This setting enables the specification for imposition
such as page alignment and image rotation to be
changed to the specification of old models when job
orientation and paper size are mixed.
The old models are below:
- PCL: 04A and earlier models
- PS/PDF/RPCS: 05S and earlier models
- BMLinkS: 05A and earlier models
IRIPS PS/PDF:
- 09A and earlier models: Operation under current
model specification is not supported (Operation with
older specification is recommended)
- 15S and later models: Operation under current
model specification is supported.
bit
7
Paper Path for Letterhead Simplex Job
Simplex paper
path
Duplex paper
path
This setting enables the simplex job to be routed
through the duplex unit.
Only affects jobs specified as letterhead.
1001
[Bit Switch]
1-001-006
Bit Switch 6
0
1
bit 0
DFU
-
-
bit 1
DFU
-
-
bit 2
DFU
-
-
bit 3
DFU
-
-
bit 4
DFU
-
-
bit 5
DFU
-
-
bit 6
DFU
-
-
bit 7
DFU
-
-
1001
[Bit Switch]
1-001-007
Bit Switch 7
0
1
bit 0
DFU
-
-
bit 1
DFU
-
-