6.2
SEL-2414 Transformer Monitor Instruction Manual Date Code 20130214
Settings
View/Change Settings Using the Front Panel
View/Change Settings Using the Front Panel
You can use the pushbuttons on the front panel to view/change settings.
Section 8: Front-Panel Operations presents the operating details of the front
panel. Enter the front-panel menu by pushing the ESC pushbutton. It will display
the following message:
Scroll down the menu by using the Down Arrow pushbutton until the display shows
the following message:
The cursor (underline) should be on the SET/SHOW command. Enter the
SET/SHOW command by pushing the Enter pushbutton. The display shows the
following message:
Select the underlined Device message with the Enter pushbutton, and the device
will present you with the Device settings as listed in the SEL-2414 settings
sheets. Use the Up Arrow, Down Arrow, Left Arrow, and Right Arrow pushbuttons to
scroll through the Device settings and view/change them according to your needs
by selecting and editing them. After viewing/changing the Device settings, press
the ESC pushbutton until the following message appears:
Select and enter the appropriate command by pushing the Enter pushbutton.
Select Yes to save the settings changes and No to discard the changes.
To Next Page
Loading...
