8.14
SEL-2414 Transformer Monitor Instruction Manual Date Code 20130214
Front-Panel Operations
Operation and Target LEDs
Lamp Test
The TARGET RESET pushbutton also provides a front-panel lamp test. Pressing and
holding the TARGET RESET pushbutton illuminates all the front-panel LEDs, and
these LEDs remain illuminated for as long as TARGET RESET is pressed. The target
LEDs return to a normal operational state after release of the TARGET RESET push-
button.
Other Target Reset Options
Use the ASCII command TAR R to reset the target LEDs; see TARGET Com-
mand (Display Device Word Bit Status) on page 7.26 for more information. Pro-
gramming specific conditions in the SEL
OGIC control equation RSTTRGT is
another method for resetting target LEDs. Access RSTTRGT in the Global set-
tings (Data Reset Control).
To Next Page
Loading...
