xiii
Date Code 20130214 Instruction Manual SEL-2414 Transformer Monitor
Preface
Safety and General Information
Laser/LED Emitter
The SEL-2414 is a Class 1 LED Product and complies with IEC 60825-1:1993
+ A1:1997 + A2:2001. The following figure shows the lower portion of the com-
pliance label that is located on the left side of the device (when facing the front of
the device).
The following table shows LED information specific to the SEL-2414 (see
Figure 2.5–Figure 2.7 for the location of Port 2, the port using these LEDs, on
the device).
Class 1 LED Product Compliance Label and Location
SEL-2414 LED Information
Item Detail
Mode Multimode
Wavelength 850 nm
Source LED
Connector type ST
Output power –11.7 to –3.7 dBm
159-0516
This product may be covered by one or
more of the following U.S. Patents:
Other U.S. Patents Pending
Foreign Patents Issued and Pending
6,744,391 6,869,295 7,698,582
D493,773
27G6
Process Control Equipment
38TH
Process Control Unit
For Hazardous Locations
R
R
205948
To Next Page
Loading...
