Sel 2414 - Page 164

SET.34
of 36
SEL-2414 Transformer Monitor Instruction Manual Date Code 20130214
SEL-2414 Settings Sheets
Logic Settings (SET L Command)
]
Fast Message Read Settings
Enter up to 24 Analog Quantities separated by spaces or commas in each of the four lists.
Use NA to disable setting.
FMR1 NAME (9 characters) FMR1NAM
:=
FMR1
:=
FMR2 NAME (9 characters) FMR2NAM
:=
FMR2
:=
FMR3 NAME (9 characters) FMR3NAM
:=
FMR3
:=
FMR4 NAME (9 characters) FMR4NAM
:=
FMR4
:=
Fast Message Remote Analog Settings
I = Integer, F = Float, L = Long
Remote Analog Value Type (I, F, L) RA01TYPE
:=
Remote Analog Value Type (I, F, L) RA02TYPE
:=
Remote Analog Value Type (I, F, L) RA03TYPE
:=
Remote Analog Value Type (I, F, L) RA04TYPE
:=
Remote Analog Value Type (I, F, L) RA05TYPE
:=
Remote Analog Value Type (I, F, L) RA06TYPE
:=
Remote Analog Value Type (I, F, L) RA07TYPE
:=
Remote Analog Value Type (I, F, L) RA08TYPE
:=
Remote Analog Value Type (I, F, L) RA09TYPE
:=
Remote Analog Value Type (I, F, L) RA10TYPE
:=
Remote Analog Value Type (I, F, L) RA11TYPE
:=
Remote Analog Value Type (I, F, L) RA12TYPE
:=
Remote Analog Value Type (I, F, L) RA13TYPE
:=
Remote Analog Value Type (I, F, L) RA14TYPE
:=
Remote Analog Value Type (I, F, L) RA15TYPE
:=
Remote Analog Value Type (I, F, L) RA16TYPE
:=
Remote Analog Value Type (I, F, L) RA17TYPE
:=
Remote Analog Value Type (I, F, L) RA18TYPE
:=
Remote Analog Value Type (I, F, L) RA19TYPE
:=
Remote Analog Value Type (I, F, L) RA20TYPE
:=
Remote Analog Value Type (I, F, L) RA21TYPE
:=
Remote Analog Value Type (I, F, L) RA22TYPE
:=
Remote Analog Value Type (I, F, L) RA23TYPE
:=
Remote Analog Value Type (I, F, L) RA24TYPE
:=
Remote Analog Value Type (I, F, L) RA25TYPE
:=
Remote Analog Value Type (I, F, L) RA26TYPE
:=
Remote Analog Value Type (I, F, L) RA27TYPE
:=
Remote Analog Value Type (I, F, L) RA28TYPE
:=
Remote Analog Value Type (I, F, L) RA29TYPE
:=
Remote Analog Value Type (I, F, L) RA30TYPE
:=
Remote Analog Value Type (I, F, L) RA31TYPE
:=
Remote Analog Value Type (I, F, L) RA32TYPE
:=