Techman Robot TM Palletizing Operator - 2 Safety Information; 2.3 Safety Precautions

TM Palletizing Operator User’s Manual Product Version: 1.0 / Document Version: 1.0 29
2 Safety Information
2.1 Overview
This chapter describes the comprehensive important safety information of TM Palletizing Operator. The user and
system integrator of TM Palletizing Operator must read and fully understand this chapter before using this robot.
2.2 Applicable Product Version
This document is only applicable to the combination of the following software and hardware versions of system.
Users can check the hardware version of the system on the product label (see Table 5). For the robot system
information, check the “Techman Robot Product Brief Information” sheet in the control box carton. For the software
information, check the software version in TMflow.
Safety System Version: TM Palletizing Operator Safety System 1.0*
TM Palletizing Operator Product Version
1.0
TECHMAN ROBOT Safety System
3.2
*Within the scope of hardware and software combination above, the safety
system version remains the same as TM Palletizing Operator Safety System 1.0
Table 5: Safety System versioning information
Users shall confirm whether the software and hardware versions are consistent with the table above. Techman
Robot Inc. assumes no liability for any safety issues caused by referring to the instruction of an incorrect version.
2.3 Safety Precautions
DANGER:
This product can cause serious injury or death, or damage to itself and other equipment, if
the following safety precautions are not conducted.
 All personnel who install, operate, teach, program, or maintain the system must read the manuals and pay
attention to the software and hardware version of this product, and complete necessary training course for
their responsibilities in regard to the product.
 All personnel who design the system must read the manuals according to the software and hardware version
of this product, and must comply with all local and national safety regulations for the location in which the
product is installed.
Read Manual and Impact Warning Labels