Techman Robot TM Palletizing Operator - Preface; Product Versioning Information; Table 1: Safety Definition Symbols; Table 2: Version Information

TM Palletizing Operator User’s Manual Product Version: 1.0 / Document Version: 1.0 3
Preface
Techman Robot Inc. assumes no responsibility for any damage or injury arising from the improper use of the palletizing
operator and the robot. The following symbols indicate the definitions of the warning and caution levels used in this
manual. Pay close attention to these symbols when reading the manual and using the system to avoid personal injuries
or equipment damage.
DANGER:
Identifies an imminently hazardous situation which, if not avoided, is likely to result in
serious injury, and might result in death or severe property damage.
WARNING:
Identifies a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, and might result in serious injury, death, or significant property damage.
CAUTION:
Identifies a potentially hazardous situation which, if not avoided, might result in minor
injury, moderate injury, or property damage.
WARNING: ELECTROCUTION RISK
Identifies a hazardous electrical situation.
Table 1: Safety definition symbols
The following symbols require readers’/users’ attention regarding some functional details or tips.
IMPORTANT:
This symbol represents the relevant functional details to assist the programming and
use.
NOTE:
This symbol represents the relevant functional use tips to assist programming efficiency
Product Versioning Information
TM Palletizing Operator Product Version 1.0
TM Robot Software Version
1.76
TM Robot Hardware Version
3.2
TMstudio Software Version
1.0
TM Palletizing Operator Software Package
V001
TM Palletizing Operator Safety System
1.0
*Within the scope of hardware and software combination above, the product
version remains the same as TM Palletizing Operator Product Version 1.0.
Table 2: Version information