Using Lists & Spreadsheet 239
Exchanging data with other computer software
You can copy table data to and from software outside the TI-Nspire™
applications, such as TI DataEditor (in the TI Connect™ software) and
Microsoft® Excel® spreadsheet software.
For example, you can copy:
• The values of individual cells, a range of cells, or an entire list from
TI DataEditor.
• The values (not the underlying formulas) of individual cells, a range
of cells, or an entire column from a Microsoft® Excel® spreadsheet.
• A number from TI DataEditor.
• The value of a matrix from TI DataEditor.
x
The count of successes in the sample for the
1-PropZTest and 1-PropZInt. Must be an integer | 0.
n
The count of observations in the sample for the
1-PropZTest and 1-PropZInt. Must be an
integer > 0.
x1
The count of successes from sample one for the
2-PropZTest and 2-PropZInt. Must be an integer | 0.
x2
The count of successes from sample two for the
2-PropZTest and 2-PropZInt. Must be an integer | 0.
n1
The count of observations in sample one for the
2-PropZTest and 2-PropZInt. Must be an integer > 0.
n2
The count of observations in sample two for the
2-PropZTest and 2-PropZInt. Must be an integer > 0.
C-Level
The confidence level for the interval instructions.
Must be ‚ 0 and < 100. If it is ‚ 1, it is assumed to be
given as a percent and is divided by 100.
Default=0.95.
df
df (degrees of freedom) represents (number of
sample categories) - (number of estimated
parameters for the selected distribution + 1).
RegEQ
The prompt for the name of the function where the
calculated regression equation is to be stored.
Input Description
To Next Page
Loading...
