WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 171
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.3 “PLC Runtime” Menu
This menu contains other submenus with information and settings for the runtime
system.
Table 112: “PLC Runtime” Menu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. Information
Opens a submenu with information on the runtime
system
2. General Configuration
Opens a submenu with settings for the runtime
system
3. WebVisu
Opens a submenu with settings for the Web
visualization
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.3.1 “PLC Runtime” > “Information” Submenu
This submenu contains other submenus with information on the runtime system
and PLC program.
Table 113: “PLC Runtime” > “Information” Submenu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. Runtime Version
Opens a submenu to display the runtime version
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.3.2 “Information” > “Runtime Version” Submenu
In this submenu, the runtime version is displayed.
Table 114: “PLC Runtime” > “Information” > “Runtime Version” Submenu
Parameters
Explanation
Version
The version of the currently enabled runtime system
is shown. If the runtime system is disabled, “None”
is displayed.
To return to the higher-level menu, press [Q] or [Return].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English