WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 181
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.4.13 “Ethernet Ports” > “Interface Xn” Submenu
This submenu contains the settings for the selected ETHERNET interface.
Table 132: “Networking” > “Ethernet” > “Ethernet Ports” > “Interface Xn” Submenu
Submenu
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. Port
Set here whether the selected port is to be used.
0. Back to …
Back to the higher-level menu
1. Disabled
The port is not used.
2. Enabled
The port is used.
2. Autonegotiation
Set here whether the Autonegotiation function is
enabled for the selected port.
0. Back to …
Back to the higher-level menu
1. Disabled
Autonegotiation is disabled.
2. Enabled
Autonegotiation is enabled.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English