WAGO PFC100 - Ports and Services Menu; Table 154: Ports and Services Menu

WAGO-I/O-SYSTEM 750 Commissioning 199
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11 “Ports and Services” Menu
This submenu contains other submenus with settings for the respective services.
Table 154: “Ports and Services” Menu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. Telnet
Opens a submenu with settings for the Telnet
service
2. FTP
Opens a submenu with settings for the FTP service
3. FTPS
Opens a submenu with settings for the FTPS
service
4. HTTP
Opens a submenu with settings for the HTTP
service
5. HTTPS
Opens a submenu with settings for the HTTPS
service
6. NTP
Opens a submenu with settings for the NTP service
7. SSH
Opens a submenu with settings for the SSH server
8. TFTP
Opens a submenu with settings for the TFTP server
9. DHCPD
Opens a submenu with settings for the DHCPD
service
10. DNS
Opens a submenu with settings for the DNS service
11. IOCHECK PORT
Opens a submenu with settings for the WAGO-I/O-
CHECK port
12. Modbus TCP
Opens a submenu with settings for the Modbus TCP
service
13. Modbus UDP
Opens a submenu with settings for the Modbus UDP
service
14. OPC UA
Opens a submenu with settings for the OPC UA
service
15. PLC Runtime Services
Opens a submenu with settings for the PLC runtime
system services
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].