WAGO PFC100 - Ports and Services > DNS Submenu; Table 165: Ports and Services > DNS Submenu

WAGO-I/O-SYSTEM 750 Commissioning 205
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11.11 “Ports and Services” > “DNS” Submenu
This submenu contains the settings for the DNS service.
Table 165: “Ports and Services” > “DNS” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the DNS service.
0. Back to …
Back to the higher-level menu
1. Enable
The DNS service is enabled.
2. Disable
The DNS service is disabled.
2. Mode
Select the operating mode of the DNS server.
0. Back to …
Back to the higher-level menu
1. Proxy
The requests are buffered to optimize
throughput.
2. Relay
All requests are routed directly.
3. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
4. Add static hostname
Enter a new static assignment of IP address to
hostname,
e.g., “192.168.1.20:hostname”.
You can enter 10 assignments.
(5 + n). Static Host (n)
This displays the hostnames for IP addresses.
0. Back to …
Back to the higher-level menu
1. Edit
Opens a submenu to change the
selected assignment
2. Delete
Deletes the selected assignment
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.