WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 175
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.4 “Networking” Menu
This menu contains other submenus with settings for the network configuration.
Table 119: “Networking” Menu
Parameters
Explanation
0. Back to …
Back to the higher-level menu
1. Host/Domain Name
Opens a submenu with setting options for the
general TCP/IP parameters
2. TCP/IP
Opens a submenu with TCP/IP settings for the
ETHERNET interfaces
3. Ethernet
Opens a submenu with settings for the ETHERNET
configuration
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.4.1 “Networking” > “Host/Domain Name” Submenu
This submenu contains the “Hostname” and “Domain Name” submenu with
setting options for the general TCP/IP parameters.
Table 120: “Networking” > “Host/Domain Name” Submenu
Parameters
Explanation
0. Back to …
Back to the higher-level menu
1. Hostname
Opens a submenu with the hostname settings
In addition to the menu item, the configured and
current hostname are displayed.
2. Domain Name
Opens a submenu hostname settings
In addition to the menu item, the configured and
current domain name are displayed.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English