WAGO PFC100 User Manual

208 Commissioning WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11.16 “…” > “Firewall Status” Submenu
This submenu contains firewall settings for the selected service.
Table 170: “Ports and Services” > “Firewall Status” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. VPN
Enable or disable the firewall for the VPN interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the VPN interface is
permitted.
2. close
Data traffic via the VPN interface is
not permitted.
2. WAN
Enable or disable the firewall for the WAN interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the WAN interface is
permitted.
2. close
Data traffic via the WAN interface is
not permitted.
3. X1
Enable or disable the firewall for the X1 interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the X1 interface is
permitted.
2. close
Data traffic via the X1 interface is not
permitted.
4. X2
Enable or disable the firewall for the X2 interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the X2 interface is
permitted.
2. close
Data traffic via the X2 interface is not
permitted.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English