WAGO PFC100 - Ports and Services > FTP Submenu; Ports and Services > Telnet Submenu; Table 155: Ports and Services > Telnet Submenu; Table 156: Ports and Services > FTP Submenu

200 Commissioning WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11.1 “Ports and Services” > “Telnet” Submenu
This submenu contains the settings for the Telnet service.
Table 155: “Ports and Services” > “Telnet” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the Telnet service.
0. Back to …
Back to the higher-level menu
1. Enable
The Telnet service is enabled.
2. Disable
The Telnet service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.11.2 “Ports and Services” > “FTP” Submenu
This submenu contains the settings for the FTP service.
Table 156: “Ports and Services” > “FTP” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the FTP service.
0. Back to …
Back to the higher-level menu
1. Enable
The FTP service is enabled.
2. Disable
The FTP service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].