WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 179
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.4.9 “TCP/IP” > “DNS Server” Submenu
This submenu contains the settings for the DNS server.
Table 128: “Networking” > “TCP/IP” > “DNS Server” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
n. DNS Server n
The addresses of the defined DNS servers are
displayed. Other submenus are available for the
server entered.
0. Back to …
Back to the higher-level menu
1. Edit
You can change the selected DNS
server address.
2. Delete
You can delete the selected DNS
server address.
(n+1). Add new DNS
Server
Add additional DNS server addresses.
You can enter 10 addresses.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
7.8.2.4.10 “Networking” > “Ethernet” Submenu
This submenu contains other submenus with settings for the ETHERNET
configuration.
Table 129: “Networking” > “Ethernet” Submenu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. Switch Configuration
Opens a submenu with settings for the IP
address(es)
2. Ethernet Ports
Opens a submenu with settings for the ETHERNET
interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English