WAGO PFC100 - Security Settings Page; Transport Layer Security Settings Group; Table 105: Security Settings WBM Page - Transport Layer Security Settings Group

WAGO-I/O-SYSTEM 750 Commissioning 161
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.38 “Security Settings” Page
The network security settings are found on the “Security Settings” page.
7.8.1.38.1 “Transport Layer Security Settings” Group
Table 105: “Security Settings” WBM Page – “Transport Layer Security Settings” Group
Parameters
Explanation
TLS configuration
Here you can set what TLS versions and
cryptographic methods are allowed for HTTPS.
Standard
The Webserver allows TLS 1.0,
TLS 1.1 and TLS 1.2, as well as
cryptographic methods that are
no longer considered secure.
Strong
The Webserver only allows TLS
Version 1.2 and strong
algorithms.
Older software and older
operating systems may not
support TLS 1.2.
Click on [Submit] to accept the changes. The changes will be effective
immediately.
BSI Technical Guidelines TR-02102
The rules for the “Strong” setting are based on technical guidelines TR-02102 of
the German Federal Office for Information Security.
You can find the guidelines on the Internet at: https://www.bsi.bund.de >
“Publications” > “Technical Guidelines.”