WAGO PFC100 - DNS Server Group; Table 43: WBM TCP;IP Configuration Page - DNS Server Group

110 Commissioning WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.8.3 “DNS Server” Group
Table 43: WBM “TCP/IP Configuration” Page – “DNS Server” Group
Parameters
Explanation
Configured: None/
DNS Server n
The addresses of the defined DNS servers are
displayed. If no server has been defined,
“Configured: None” is displayed.
New Server IP
Add additional DNS addresses.
You can enter 10 addresses.
Additionally used
(assigned by DHCP)
The DNS servers assigned if necessary by DHCP
(or BootP) are displayed. If no DNS server has been
assigned by DHCP (or BootP), “none” is displayed.
Click [Delete] to remove the selected DNS server. The change is effective
immediately.
Click [Add] to add the entered DNS server. The change is effective immediately.