WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 203
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11.7 “Ports and Services” > “SSH” Submenu
This submenu contains the settings for the SSH service.
Table 161: “Ports and Services” > “SSH” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
You can enable/disable the SSH server.
0. Back to …
Back to the higher-level menu
1. Enable
The SSH server is enabled.
2. Disable
The SSH server is disabled.
2. Port
Enter the port number.
3. Allow root login
You can enable or inhibit root access.
0. Back to …
Back to the higher-level menu
1. Enable
Root access is permitted.
2. Disable
Root access is not permitted.
4. Allow password login
Enable or disable the password query function.
0. Back to …
Back to the higher-level menu
1. Enable
Password query is enabled.
2. Disable
Password query is disabled.
5. Status of firewalling
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.11.8 “Ports and Services” > “TFTP” Submenu
This submenu contains the settings for the TFTP service.
Table 162: “Ports and Services” > “TFTP” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable or disable the TFTP server.
0. Back to …
Back to the higher-level menu
1. Enable
The TFTP server is enabled.
2. Disable
The TFTP server is disabled.
2. Transfer Directory
Specify here the path for downloading the server
directory.
3. Status of firewalling
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English